1-RAÝN BÝRD
 - Rotorlar
 - Damlama sulama
 - Dekoder Sistemleri
 - Kontrol Sistemleri
 - Kontrol Üniteleri
 - Merkezi Kontrol Sistemleri
 - Pompa Ýstasyonlarý
 - Spreyler
 - Uydu Sistemleri
 - Vanalar
1- RAİN BİRD
2-HUNTER
3-K-RAİN/ORBİT/BACCA
4-NELSON
5-OTTOMAN IRRIGATION
6-ESEN PLASTİK
7-SUYAP COUPLING

sulama videolari, sulama görüntüleri, sulama dökümanları

sulama iletişim, sulama hizmetleri, sulama şirketleri

sulama videolari, sulama görüntüleri sulama iletisim
Ana Sayfa > 1-RAÝN BÝRD > STRATUS™ II Fiyat : 0.00 $


Büyük Resim
STRATUS™ II Fiyat : 0.00 $



Malzeme Özellikleri :
GENEL ÖZELLIKLER

Standard Features:
• Capable of controlling two (2) individual golf courses, one 18-hole and one 9-hole, (for a total of 27 holes) each with its own database information.
• Programming and control of other areas such as driving range, chipping green, putting green, club house, nursery, and miscellaneous areas.
• Graphic display of entire course—indicating areas to be irrigated —such as: green, tee, fairway, approach, perimeter, rough, and miscellaneous areas.
• Easy table selection of sprinkler type, nozzle size and operating pressure for each area and the flow demand providing precise, consistent flow information and resulting in reliable, efficient irrigation management.
• Station detail screens show a complete analysis of all databases associated with individual holes.
• System flo-bar continuously indicates flow conditions.
• Direct manual access and system monitoring of entire course at all times.
• Course daily and seasonal logs for record keeping and easy compliance with regulatory requirements regarding water usage.
• Decoder-based system automatic diagnostic testing.
• Built-in database utilities provide for easy backup and management of system and program data files.
• DMA Express allows the user the ability to manually operate any stations on the course.
• Satellite View provides immediate view of stations in either area or satellite orientations.
• Station data table gives complete database information for each individual station.
• Multistation programming and operation for satellites.
• Programs may be set to adhere to manual water budgeting; by system, by programs and/or by schedules.

Unique Features:
• QuickIRR programming feature allows programming by specific areas and designating sequence of operation.
• Smart Sensors allow a sensor condition to activate an alarm and turn on/off the system, programs and schedules, or pause/ resume the same.
• Exclusive CYCLE + SOAK™ feature provides for control of the application of water to each area, to be consistent with the infiltration rate of the soil. Total application of water is precisely controlled regardless of number of cycles, each cycle time and/or soak time specified.
• Course monitor screens provide a graphical, real-time view of the course with the ability to monitor activities at a glance.
• Pump Profiling feature limits power consumption during peak periods.
• Industry's only innovative, guided initialization and start-up programming resulting in customized Quick Start program.
• Dry Run feature provides for test of a program and making necessary adjustments before actually operating it in the field.



TEKNIK ÖZELLIKLER

Installation and Design:
• Stratus™ II software—PC computer, Pentium 4 (or higher) microprocessor, 1.7 GHz (min) clock speed, 512 megabytes (min) RAM, 20 GB hard drive, 1.44 MB floppy disk drive, 56K modem, CD–RW drive, 32 MB video card, speakers, monitor, printer.
• Voltage: 120 or 240 VAC, 50/60 Hz.
• MIM, or MDI Interface Unit—indoor mount.

Functional:
• Operates up to 27 golf holes.
• Basic software operates hard-wired satellite system, or decoderbased system.
• Satellites per system: 56 maximum.
• Decoders per system: up to 500 single decoder addresses and 1,000 solenoids in standard and 1,000 single decoder adresses and 2,000 solenoids in hybrid mode. Systems greater than 500 single decoder adresses require an additional MDI and hybrid module.
• Communication medium: two-wire, 24 VAC, voltage-regulated signal for hard-wired satellite system and decoder-based system.
• All programming, execution of field commands, station timing, and data logging done at the central computer.
• Continuous on-line communication between central and field units provides true central control.
• All data logging maintained at the computer for instant review and retrieval.
• QuickIRR™ programming provides for a quick and easy method to automatically build programs to meet your irrigation challenges

Programming:
• Program-/schedule-/satellite-/area-based system providing maximum flexibility in programming.
• Multiple languages to select from.
• Pump capacities and priority settings.
• Three flow measurement units to select from: U.S. gallons per minute, metric cubic meters per hour, and metric liters per second.
• Automatic Rain Shut-Down with integration of a Rain Sensor.
• Watersaver feature provides water budgeting in 1 percent increments from 0 to 300 percent at the system level, program level or at the schedule level.
• Built-in Flo-Manager® feature automatically distributes and limits flow within the system, to eliminate hydraulic overload while maintaining maximum system efficiency.
• Full system remote control with The FREEDOM™ System (optional).
• Direct manual access of any stations, at any time.
• Add a FREEDOM-Pad™ for optimum field control and Database Management (optional).

AKSESUARLAR
Software options:
• Station Layers-Map/Operation- allows for the turning on/off of different map layers, and also the station resolution for monitoring, altering station properties, or programming.
• Weather Software allows central to communicate with Rain Bird weather station, being able to monitor and receive an updated and calculated ET value for establishing run times.
• Smart Weather Software allows the same communication as regular Weather Software, but also allows user to set and reprogram the data logger of the weather station to activate alarms based on user-defined conditions for any of the instruments, i.e., rainfall, windspeed, temperature, humidity, etc.
• Hybrid allows multiple field interface deviees on a central. These could bemultiple MIMs or MIDs, or a combination of these devices, therefore allowing the possibility of having a decoder system in addition to a satellite system operate from the same central.
• Smart Pump ™links your pump station to your central control system providing real-time communication and optimizing your irrigation cycle. Smart Pump also has the ability to monitor and react to changes in station capacity. Should pump capacity increase or decrease, the software adjusts the irrigation cycle based on this change .
• Map Utilities make the irrigation map useful for measurement and area calculations.