1-RAÝN BÝRD
 - Rotorlar
 - Damlama sulama
 - Dekoder Sistemleri
 - Kontrol Sistemleri
 - Kontrol Üniteleri
 - Merkezi Kontrol Sistemleri
 - Pompa Ýstasyonlarý
 - Spreyler
 - Uydu Sistemleri
 - Vanalar
1- RAİN BİRD
2-HUNTER
3-K-RAİN/ORBİT/BACCA
4-NELSON
5-OTTOMAN IRRIGATION
6-ESEN PLASTİK
7-SUYAP COUPLING

sulama videolari, sulama görüntüleri, sulama dökümanları

sulama iletişim, sulama hizmetleri, sulama şirketleri

sulama videolari, sulama görüntüleri sulama iletisim
Ana Sayfa > 1-RAÝN BÝRD > Nimbus™ II Fiyat : 0.00 $


Büyük Resim
Nimbus™ II Fiyat : 0.00 $



Malzeme Özellikleri :
GENEL ÖZELLIKLER

Standard Features:
• Capable of controlling three (3) individual golf courses with a maximum of 36 holes, each with its own database information, irrigation programming, and flow management data.
• Programming and control of other areas such as driving range, chipping green, putting green, club house, nursery, and miscellaneous areas.
• Individual hole walk through provides for customized detail of each area's special requirements.
• Easy table selection of sprinkler type, nozzle size and operating pressure for each area and the flow demand providing precise, consistent flow information and resulting in reliable, efficient irrigation management.
• Automatic calculation and entry of precipitation rates for each station with selection of sprinkler model, pattern, and spacing.
• Complete flow management database for up to six (6) independent pump stations; up to 250 branches and 500 flow zones for each pump station. This results in highly efficient pump station operation, shortest watering cycle time and conservation of energy.
• Individual flow graphs generated for each of the three courses that are possible to be programmed with individual station activity. Information presented in colorful charts.
• Flow graphs are automatically maintained on file for future access and reference.
• Programs may be set to automatically track Weather Station ET value.
• Programs may be set to adhere to manual water budgeting; by system, by programs and/or by schedules.
• Individual station ET adjustment possible to adjust for individual area microclimates.
• Graphic display of each hole you have defined: indicating areas to be irrigated such as: green, tee, fairway, approach, perimeter, rough and miscellaneous areas.
• Multistation programming and operation for satellites.
• Station Data Table gives complete database information for each individual station.
• System flo-bar continuously indicates flow conditions.
• Course Graphic Overview provides visual indication of all areas being irrigated.
• Direct manual access and system monitoring of entire course at all times.
• Course daily and seasonal logs for record keeping and easy compliance with regulatory requirements regarding water usage.
• Decoder-based system automatic diagnostic testing.
• Built-in database utilities provide for easy backup and management of system and program data files.
• Exclusive design, programming, and operational informational data bank provides quick, easy reference for the system programmer or operator.
• DMA Express allows the user the ability to manually operate any stations on the course.
• Satellite View provides immediate view of stations in either area or
satellite orientations.
• Weather Software allows central to communicate with Rain Bird weather station, being able to monitor and receive an updated and calculated ET value for establishing run times.

Unique Features:
• Station Layers-Map/Operation- allows for the turning on/off of different map layers, and also the station resolution for monitoring, altering station properties, or programming.
• QuickIRR programming provides for a quick and easy method to automatically build programs to meet your irrigation challenges.
• Smart Sensors allow a sensor condition to activate an alarm and turn on/off the system, programs and schedules, or pause/ resume the same.
• Exclusive CYCLE + SOAK™ feature provides for control of the application of water to each area, to be consistent with the infiltration rate of the soil. Total application of water is precisely controlled regardless of number of cycles, each cycle time and/or soak time specified.
• Course monitor screens provide a graphical, real-time view of the course with the ability to monitor activities at a glance.
• Pump Profiling feature limits power consumption during peak periods.
• Innovative industry first, guided initialization and start-up programming resulting in customized Quick Start program.
• Dry Run feature provides for test of a program and making necessary adjustments before actually operating it in the field.
• Virtual Weather™ mode allows calculation of ET value based on manual data entry.
• Unique Cost Estimator ™ feature projects your water and power costs for an irrigation circle. Can greatly assist you in establishing your budget requirements.



TEKNIK ÖZELLIKLER

Installation and Design:
• Nimbus™ II software-PC computer, Pentium 4 (or higher) microprocessor, 1.7 GHz (min) clock speed, 512 megabytes (min) RAM, 20 GB hard drive, 1.44 MB floppy disk drive, 56K modem, CD–RW drive, 32 MB video card, speakers, LCD monitor, printer.
• Voltage: 120 or 240 VAC, 50/60 Hz.
• MIM, or MDI Interface Unit—indoor mount.

Functional:
• Operates up to 36 golf holes.
• Basic software operates hard-wired satellite system, or decoderbased system.
• Satellites (two-wire) per system: 224 maximum in standard, 336 in hybrid mode.
• Decoders per system: up to 500 single decoder addresses and 1,000 solenoids in standard and 1,500 single decoder addresses and 3,000 solenoids in hybrid mode. Systems greater than 500 single decoder address require additional MDI's and hybrid module.
• Communication medium: two-wire, 24 VAC, voltage-regulated signal for hard-wired satellite system and decoder-based system.
• All programming, execution of field commands, station timing, and data logging done at the central computer.
• Continuous on-line communication between central and field units provides true central control.
• All data logging maintained at the computer for instant review and retrieval.
• QuickIRR™ programming provides for a quick and easy method to automatically build programs to meet your irrigation challenges.

Programming:
• Program-/schedule-/satellite-/area-based system providing maximum flexibility in programming.
• Multiple languages to select from.
• Three flow measurement units to select from—U.S. gallons per minute, metric cubic meters per hour, and metric liters per second.
• Automatic Rain Shut-Down with integration of a Rain Sensor.
• Fully automatic ET implementation of selected programs.
• Watersaver feature provides water budgeting in 1 percent increments from 0 to 300 percent at the system level, program level or at the schedule level.
• Accepts pump capacity data and priority of operation settings.
• Built in Flo-Manager® feature balances system demand at maximum capacity with the efficiency of the pump station and delivery network by staging pumps to reduce wear and tear on the hydraulic system.
• Accepts full flow management data for system piping network flow zones, branches, and pump station data.
• Full system remote control with The FREEDOM™ System (optional).
• Direct manual access of any stations, at any time.
• Add a FREEDOM-Pad™ for optimum field control and Database Management (optional).


AKSESUARLAR
Software options:
• Smart Weather Software allows the same communication as regular Weather Software, but also allows user to set and reprogram the data logger of the weather station to activate alarms based on user-defined conditions for any of the instruments, i.e., rainfall, windspeed, temperature, humidity, etc.
• Hybrid allows multiple field interface devices on a central. These could be multiple MIMs or MIDs, or a combination of these devices, therefore allowing the possibility of having a decoder system in addition to a satellite system operate from the same central.
• Multiple Weather Stations allows the central to communicate with up to 5 different weather stations throughout the golf course to assign different weather stations.
• Smart Pump ™links your pump station to your central control system providing real-time communication and optimizing your irrigation cycle. Smart Pump also has the ability to monitor and react to changes in station capacity. Should pump capacity increase or decrease, the software adjusts the irrigation cycle based on this change (optional).
• Map Utilities make the irrigation map useful for measurement and area calculations.