1-RAİN BİRD
 - Rotorlar
 - Damlama sulama
 - Dekoder Sistemleri
 - Kontrol Sistemleri
 - Kontrol Üniteleri
 - Merkezi Kontrol Sistemleri
 - Pompa İstasyonları
 - Spreyler
 - Uydu Sistemleri
 - Vanalar
1- RAİN BİRD
2-HUNTER
3-K-RAİN/ORBİT/BACCA
4-NELSON
5-OTTOMAN IRRIGATION
6-ESEN PLASTİK
7-SUYAP COUPLING

sulama videolari, sulama görüntüleri, sulama dökümanları

sulama iletişim, sulama hizmetleri, sulama şirketleri

sulama videolari, sulama görüntüleri sulama iletisim
Ana Sayfa > 1-RAİN BİRD > SATELLITE CONVERSION KIT Fiyat : 0.00 $


Büyük Resim
SATELLITE CONVERSION KIT Fiyat : 0.00 $



Malzeme Özellikleri :
GENEL ÖZELLIKLER
To convert any type of 12-station satellites or controllers, (electromechanical, Toro Varitime, stand alone controller, etc…) into a compatible decoder system (Stratus™LT, Stratus™ II, Nimbus™II, Cirrus™, MDC-50-200, Site Control).
The Satellite Conversion Kit is a simple electric board set in a plastic box including :
• 12 relays
• 2 FD-601 decoders pre-assembled
• 1 connector for decoder signal cable
• 1 connector for 12 outputs to the stations
• 4 commons and the 24 volt input (phase and neutral).
The Kit can use the 24 volts coming from the satellite transformer or from any 24 volt AC power supply.
No transformer included.
The kit works with 2 FD-601 decoders (included).

TEKNIK ÖZELLIKLER
• Number of contacts per relay : 1 NO
• Nominal intensity per relay : 10 A
• Max intensity per relay : 20 A
• Nominal power per relay : 2500 VA
• Type of contact : AgNi
• Solenoid : Voltage 6 VDC - 55 Ohms
• Power : 0,65 W
• Insulation resistance : 20.102 Ohm
• Temperature : -40 to +70°C
• Connections : Printed board
• Size (mm) : 300mm x 230mm x 87mm